YOKOGAWA DL350 - Page 114

4-87
IM DL350-17EN
Commands
1
2
3
4
5
App
Index
:CURSor:FFT:MARKer:M<x>:F?
Function Queries all frequency-axis settings of an FFT
cursor (marker cursor).
Syntax
:CURSor:FFT:MARKer:M<x>:F?
<x> = 1 to 4
:CURSor:FFT:MARKer:M<x>:F:STATe
Function Sets or queries whether the frequency-axis value
of an FFT cursor (marker cursor) is displayed.
Syntax
:CURSor:FFT:MARKer:M<x>:F:
STATe {<Boolean>}
:CURSor:FFT:MARKer:M<x>:F:STATe?
<x> = 1 to 4
Example
:CURSOR:FFT:MARKER:M1:F:STATE ON
:CURSOR:FFT:MARKER:M1:F:STATE?
-> :CURSOR:FFT:MARKER:M1:F:STATE 1
:CURSor:FFT:MARKer:M<x>:F:VALue?
Function Queries the frequency-axis value of an FFT
cursor (marker cursor).
Syntax
:CURSor:FFT:MARKer:M<x>:F:VALue?
<x> = 1 to 4
Example
:CURSOR:FFT:MARKER:M1:F:VALUE?
-> :CURSOR:FFT:MARKER:M1:F:
VALUE 100.00000E+03
:CURSor:FFT:MARKer:M<x>:POSition
Function Sets or queries the position of an FFT cursor
(marker cursor).
Syntax
:CURSor:FFT:MARKer:M<x>:
POSition {<NRf>}
:CURSor:FFT:MARKer:M<x>:POSition?
<x> = 1 to 4
<NRf> = –5 to 5
Example
 :CURSOR:FFT:MARKER:M1:POSITION−3.00
:CURSOR:FFT:MARKER:M1:POSITION?
-> :CURSOR:FFT:MARKER:M1:
POSITION−3.00
:CURSor:FFT:MARKer:M<x>:TRACe
Function Sets or queries the source waveform that you
want to measure using the FFT cursor (marker
cursor).
Syntax
:CURSor:FFT:MARKer:M<x>:TRACe {OFF|
FFT1|FFT2}
:CURSor:FFT:MARKer:M<x>:TRACe?
<x> = 1 to 4
Example
:CURSOR:FFT:MARKER:M1:TRACE FFT1
:CURSOR:FFT:MARKER:M1:TRACE?
-> :CURSOR:FFT:MARKER:M1:TRACE FFT1
:CURSor:FFT:MARKer:M<x>:Y?
Function Queries all Y-axis settings of an FFT cursor
(marker cursor).
Syntax
:CURSor:FFT:MARKer:M<x>:Y?
<x> = 1 to 4
:CURSor:FFT:MARKer:M<x>:Y:STATe
Function Sets or queries whether the Y-axis value of an
FFT cursor (marker cursor) is displayed.
Syntax
:CURSor:FFT:MARKer:M<x>:Y:
STATe {<Boolean>}
:CURSor:FFT:MARKer:M<x>:Y:STATe?
<x> = 1 to 4
Example
:CURSOR:FFT:MARKER:M1:Y:STATE ON
:CURSOR:FFT:MARKER:M1:Y:STATE?
-> :CURSOR:FFT:MARKER:M1:Y:STATE 1
:CURSor:FFT:MARKer:M<x>:Y:VALue?
Function Queries the Y-axis value of an FFT cursor (marker
cursor).
Syntax
:CURSor:FFT:MARKer:M<x>:Y:VALue?
<x> = 1 to 4
Example
:CURSOR:FFT:MARKER:M1:Y:VALUE?
-> :CURSOR:FFT:MARKER:M1:Y:
VALUE−46.750000E+00
:CURSor:FFT:PEAK<x>?
Function Queries all settings of an FFT cursor (peak
cursor).
Syntax
:CURSor:FFT:PEAK<x>?
<x> = 1, 2 (cursors 1 and 2)
Cursor 1 is dedicated for use as FFT1. Cursor 2
is dedicated for use as FFT2.
:CURSor:FFT:PEAK<x>:F?
Function Queries all frequency-axis settings of an FFT
cursor (peak cursor).
Syntax
:CURSor:FFT:PEAK<x>:F?
<x> = 1, 2 (cursors 1 and 2)
:CURSor:FFT:PEAK<x>:F:STATe
Function Sets or queries whether the frequency-axis value
of an FFT cursor (peak cursor) is displayed.
Syntax
:CURSor:FFT:PEAK<x>:F:
STATe {<Boolean>}
:CURSor:FFT:PEAK<x>:F:STATe?
<x> = 1, 2 (cursors 1 and 2)
Example
:CURSOR:FFT:PEAK1:F:STATE ON
:CURSOR:FFT:PEAK1:F:STATE?
-> :CURSOR:FFT:PEAK1:F:STATE 1
4.9 CURSor Group