YOKOGAWA DL350 User Manual

4-90
IM DL350-17EN
:CURSor[:TY]:DEGRee:Y<x>:STATe
Function Sets or queries whether the measurements of an
angle cursor on the T-Y waveform is displayed.
Syntax
:CURSor:TY:DEGRee:Y<x>:
STATe {<Boolean>}
:CURSor:TY:DEGRee:Y<x>:STATe?
<x> = 1, 2
Example
:CURSOR:TY:DEGREE:Y1:STATE 1
:CURSOR:TY:DEGREE:Y1:STATE?
-> :CURSOR:TY:DEGREE:Y1:STATE 1
:CURSor[:TY]:DEGRee:Y<x>:VALue?
Function Sets or queries the measured value of an angle
cursor on the T-Y waveform.
Syntax
:CURSor:TY:DEGRee:Y<x>:VALue?
<x> = 1, 2
Example
:CURSOR:TY:DEGREE:Y1:VALUE?
-> :CURSOR:TY:DEGREE:Y1:
VALUE 0.0000000E+00
Description • If you have set the waveform that you want
to measure to ALL, all the measured values
from the channels, sub channels, and Math
channels of all the installed modules will be
returned.
• “NAN” will be returned for any unused channels
and channels that do not have modules
installed in their corresponding slots.
• For modules that have sub channels, the
measured values of all sub channels will be
returned. “NAN” will be returned for any sub
channels whose input is turned off.
:CURSor[:TY]:HORizontal?
Function Queries all horizontal cursor settings for the T-Y
waveform.
Syntax
:CURSor:TY:HORizontal?
:CURSor[:TY]:HORizontal:DY?
Function QueriesallsettingsrelatedtotheΔYaxisofthe
horizontal cursor on the T-Y waveform.
Syntax
:CURSor:TY:HORizontal:DY?
:CURSor[:TY]:HORizontal:DY:STATe
Function SetsorquerieswhethertheΔY-axisvalueof
a horizontal cursor on the T-Y waveform is
displayed.
Syntax
:CURSor:TY:HORizontal:DY:
STATe {<Boolean>}
:CURSor:TY:HORizontal:DY:STATe?
Example
:CURSOR:TY:HORIZONTAL:DY:STATE ON
:CURSOR:TY:HORIZONTAL:DY:STATE?
-> :CURSOR:TY:HORIZONTAL:DY:STATE 1
:CURSor[:TY]:HORizontal:DY:VALue?
Function QueriestheΔY-axisvalueofahorizontalcursor
on the T-Y waveform.
Syntax
:CURSor:TY:HORizontal:DY:VALue?
Example
:CURSOR:TY:HORIZONTAL:DY:VALUE?
-> :CURSOR:TY:HORIZONTAL:DY:
VALUE 300.00000E+00
:CURSor[:TY]:HORizontal:POSition<x>
Function Sets or queries a horizontal cursor position on the
T-Y waveform.
Syntax
:CURSor:TY:HORizontal:
POSition<x> {<NRf>}
:CURSor:TY:HORizontal:POSition<x>?
<x> = 1, 2
<NRf> = –5 to 5 (in 1/100 steps)
Example
 :CURSOR:TY:HORIZONTAL:POSITION2−3
:CURSOR:TY:HORIZONTAL:POSITION2?
-> :CURSOR:TY:HORIZONTAL:
POSITION2−3.00
:CURSor[:TY]:HORizontal:TRACe
Function Sets or queries the source waveform that you
want to measure using the horizontal cursors on
the T-Y waveform.
Syntax
:CURSor:TY:HORizontal:TRACe {<NRf>|
MATH<x>,<NRf>}
:CURSor:TY:HORizontal:TRACe?
<NRf> = 1 to 7
<x> = 1, 2
<NRf> = 1 to 60 (only when it is necessary to
specify the sub channel)
Example
:CURSOR:TY:HORIZONTAL:TRACE 1
:CURSOR:TY:HORIZONTAL:TRACE?
-> :CURSOR:TY:HORIZONTAL:TRACE 1
:CURSor[:TY]:HORizontal:Y<x>?
Function QueriesallsettingsrelatedtotheΔY-axisvalueof
the horizontal cursor on the T-Y waveform.
Syntax
:CURSor:TY:HORizontal:Y<x>?
<x> = 1, 2
:CURSor[:TY]:HORizontal:Y<x>:STATe
Function Sets or queries whether the Y-axis value of
a horizontal cursor on the T-Y waveform is
displayed.
Syntax
:CURSor:TY:HORizontal:Y<x>:
STATe {<Boolean>}
:CURSor:TY:HORizontal:Y<x>:STATe?
<x> = 1, 2
Example
:CURSOR:TY:HORIZONTAL:Y1:STATE ON
:CURSOR:TY:HORIZONTAL:Y1:STATE?
-> :CURSOR:TY:HORIZONTAL:Y1:STATE 1
:CURSor[:TY]:HORizontal:Y<x>:VALue?
Function Queries the Y-axis value of a horizontal cursor on
the T-Y waveform.
Syntax
:CURSor:TY:HORizontal:Y<x>:VALue?
<x> = 1, 2
Example
:CURSOR:TY:HORIZONTAL:Y1:VALUE?
-> :CURSOR:TY:HORIZONTAL:Y1:
VALUE 150.00000E+00
4.9 CURSor Group

YOKOGAWA DL350 Specifications

General

Brand	YOKOGAWA
Model	DL350
Category	Recording Equipment
Language	English