YOKOGAWA DL350 - Page 119

4-92
IM DL350-17EN
:CURSor[:TY]:MARKer:M<x>:JUMP
Function Moves the specified marker cursor to the center
of the specified zoom waveform.
Syntax
:CURSor:TY:MARKer:M<x>:JUMP {Z1|Z2}
<x> = 1 to 4
:CURSor[:TY]:MARKer:M<x>:POSition
Function Sets or queries a marker cursor position on the
T-Y waveform.
Syntax
:CURSor:TY:MARKer:M<x>:
POSition {<NRf>}
:CURSor:TY:MARKer:M<x>:POSition?
<x> = 1 to 4
<NRf> = –5 to 5 (in 1/100 steps)
Example
 :CURSOR:TY:MARKER:M1:POSITION−3
:CURSOR:TY:MARKER:M1:POSITION?
-> :CURSOR:TY:MARKER:M1:
POSITION−3.000000000000
:CURSor[:TY]:MARKer:M<x>:TRACe
Function Sets or queries the source waveform that you
want to measure using the marker cursors on the
T-Y waveform.
Syntax
:CURSor:TY:MARKer:M<x>:TRACe {OFF|
<NRf>|MATH<x>,<NRf>}
:CURSor:TY:MARKer:M<x>:TRACe?
<NRf> = 1 to 7
<x> = 1, 2
<NRf> = 1 to 60 (only when it is necessary to
specify the sub channel)
Example
:CURSOR:TY:MARKER:M1:TRACE 1
:CURSOR:TY:MARKER:M1:TRACE?
-> :CURSOR:TY:MARKER:M1:TRACE 1
:CURSor[:TY]:MARKer:M<x>:X?
Function Queries all X-axis settings for a marker cursor on
the T-Y waveform.
Syntax
:CURSor:TY:MARKer:M<x>:X?
<x> = 1 to 4
:CURSor[:TY]:MARKer:M<x>:X:STATe
Function Sets or queries whether the X-axis value for a
marker cursor on the T-Y waveform is displayed.
Syntax
:CURSor:TY:MARKer:M<x>:X:
STATe {<Boolean>}
:CURSor:TY:MARKer:M<x>:X:STATe?
<x> = 1 to 4
Example
:CURSOR:TY:MARKER:M4:X:STATE ON
:CURSOR:TY:MARKER:M4:X:STATE?
-> :CURSOR:TY:MARKER:M4:X:STATE 1
:CURSor[:TY]:MARKer:M<x>:X:VALue?
Function Queries the X-axis value of a marker cursor on
the T-Y waveform.
Syntax
:CURSor:TY:MARKer:M<x>:X:VALue?
<x> = 1 to 4
Example
:CURSOR:TY:MARKER:M4:X:VALUE?
-> :CURSOR:TY:MARKER:M4:X:
VALUE3.0000000E−03
:CURSor[:TY]:MARKer:M<x>:Y?
Function Queries all Y-axis settings for a marker cursor on
the T-Y waveform.
Syntax
:CURSor:TY:MARKer:M<x>:Y?
<x> = 1 to 4
:CURSor[:TY]:MARKer:M<x>:Y:STATe
Function Sets or queries whether the Y-axis value for a
marker cursor on the T-Y waveform is displayed.
Syntax
:CURSor:TY:MARKer:M<x>:Y:
STATe {<Boolean>}
:CURSor:TY:MARKer:M<x>:Y:STATe?
<x> = 1 to 4
Example
:CURSOR:TY:MARKER:M4:Y:STATE ON
:CURSOR:TY:MARKER:M4:Y:STATE?
-> :CURSOR:TY:MARKER:M4:Y:STATE 1
:CURSor[:TY]:MARKer:M<x>:Y:VALue?
Function Queries the Y-axis value of a marker cursor on
the T-Y waveform.
Syntax
:CURSor:TY:MARKer:M<x>:Y:VALue?
<x> = 1 to 4
Example
:CURSOR:TY:MARKER:M4:Y:VALUE?
-> :CURSOR:TY:MARKER:M4:Y:
VALUE41.666667E−03
:CURSor[:TY]:TYPE
Function Sets or queries the cursor type on the T-Y
waveform.
Syntax
:CURSor:TY:TYPE {OFF|HORizontal|
VERTical|MARKer|DEGRee|HAVertical}
:CURSor:TY:TYPE?
Example
:CURSOR:TY:TYPE MARKER
:CURSOR:TY:TYPE?
-> :CURSOR:TY:TYPE MARKER
:CURSor[:TY]:VERTical?
Function Queries all vertical cursor settings for the T-Y
waveform.
Syntax
:CURSor[:TY]:VERTical?
:CURSor[:TY]:VERTical:DX?
Function QueriesallsettingsrelatedtotheΔXvalueofthe
vertical cursor on the T-Y waveform.
Syntax
:CURSor:TY:VERTical:DX?
:CURSor[:TY]:VERTical:DX:STATe
Function SetsorquerieswhethertheΔXvaluebetween
the vertical cursors on the T-Y waveform is
displayed.
Syntax
:CURSor:TY:VERTical:DX:
STATe {<Boolean>}
:CURSor:TY:VERTical:DX:STATe?
Example
:CURSOR:TY:VERTICAL:DX:STATE 1
:CURSOR:TY:VERTICAL:DX:STATE?
-> :CURSOR:TY:VERTICAL:DX:STATE 1
4.9 CURSor Group