YOKOGAWA DL350 - Page 120

4-93
IM DL350-17EN
Commands
1
2
3
4
5
App
Index
:CURSor[:TY]:VERTical:DX:VALue?
Function QueriestheΔXvaluebetweentheverticalcursors
on the T-Y waveform.
Syntax
:CURSor:TY:VERTical:DX:VALue?
Example
:CURSOR:TY:VERTICAL:DX:VALUE?
:CURSOR:TY:VERTICAL:DX:
VALUE3.0000000E−03
Description • When the timebase is set to internal clock, this
becomes a time query between the markers.
• When the timebase is set to external clock, this
becomes a number-of-points query between
the marker cursors.
:CURSor[:TY]:VERTical:DY?
Function QueriesallsettingsrelatedtotheΔYvalueofthe
vertical cursor on the T-Y waveform.
Syntax
:CURSor[:TY]:VERTical:DY?
:CURSor[:TY]:VERTical:DY:STATe
Function SetsorquerieswhethertheΔYvaluebetween
the vertical cursors on the T-Y waveform is
displayed.
Syntax
:CURSor:TY:VERTical:DY:
STATe {<Boolean>}
:CURSor:TY:VERTical:DY:STATe?
Example
:CURSOR:TY:VERTICAL:DY:STATE ON
:CURSOR:TY:VERTICAL:DY:STATE?
-> :CURSOR:TY:VERTICAL:DY:STATE 1
:CURSor[:TY]:VERTical:DY:VALue?
Function QueriestheΔYvaluebetweentheverticalcursors
on the T-Y waveform.
Syntax
:CURSor:TY:VERTical:DY:VALue?
:CURSor[:TY]:VERTical:JUMP
Function Moves the specified vertical cursor to the center
of the specified zoom waveform.
Syntax
:CURSor:TY:VERTical:JUMP {C1_Z1|
C1_Z2|C2_Z1|C2_Z2}
:CURSor[:TY]:VERTical:PERDt?
Function Queriesallsettingsrelatedtothe1/ΔTvalue
between the vertical cursor on the T-Y waveform.
Syntax
:CURSor:TY:VERTical:PERDt?
:CURSor[:TY]:VERTical:PERDt:STATe
Function Setsorquerieswhetherthe1/ΔTvaluebetween
the vertical cursors on the T-Y waveform is
displayed.
Syntax
:CURSor:TY:VERTical:PERDt:
STATe {<Boolean>}
:CURSor:TY:VERTical:PERDt:STATe?
Example
:CURSOR:TY:VERTICAL:PERDT:STATE ON
:CURSOR:TY:VERTICAL:PERDT:STATE?
-> :CURSOR:TY:VERTICAL:PERDT:STATE 1
:CURSor[:TY]:VERTical:PERDt:VALue?
Function Queriesthe1/ΔTvaluebetweenthevertical
cursors on the T-Y waveform.
Syntax
:CURSor:TY:VERTical:PERDt:VALue?
Example
:CURSOR:TY:VERTICAL:PERDT:
VALUE 250.00000E+00
Description If the source waveform is being measured in the
frequency domain, “NAN” is returned.
:CURSor[:TY]:VERTical:POSition<x>
Function Sets or queries a vertical cursor position on the
T-Y waveform.
Syntax
:CURSor:TY:VERTical:
POSition<x> {<NRf>}
:CURSor:TY:VERTical:POSition<x>?
<x> = 1, 2
<NRf> = –5 to 5 (the resolution depends on the
measurement length)
Example
:CURSOR:TY:VERTICAL:POSITION2 4
:CURSOR:TY:VERTICAL:POSITION2?
-> :CURSOR:TY:VERTICAL:
POSITION2 4.000000000000
:CURSor[:TY]:VERTical:TRACe
Function Sets or queries the source waveform that you
want to measure using the vertical cursors on the
T-Y waveform.
Syntax
:CURSor:TY:VERTical:
TRACe {<NRf>[,<NRf>]|MATH<x>|ALL}
:CURSor:TY:VERTical:TRACe?
First <NRf> = 1 to 7
Second <NRf> = 1 to 60 (only when it is
necessary to specify the sub channel)
<x> = 1, 2
Example
:CURSOR:TY:VERTICAL:TRACE 2
:CURSOR:TY:VERTICAL:TRACE?
-> :CURSOR:TY:VERTICAL:TRACE 2
:CURSor[:TY]:VERTical:X<x>?
Function Queries all X-axis-value settings for a vertical
cursor on the T-Y waveform.
Syntax
:CURSor:TY:VERTical:X<x>?
<x> = 1, 2
:CURSor[:TY]:VERTical:X<x>:STATe
Function Sets or queries whether the X-axis value for a
vertical cursor on the T-Y waveform is displayed.
Syntax
:CURSor:TY:VERTical:X<x>:
STATe {<Boolean>}
:CURSor:TY:VERTical:X<x>:STATe?
<x> = 1, 2
Example
:CURSOR:TY:VERTICAL:X1:STATE 1
:CURSOR:TY:VERTICAL:X1:STATE?
-> :CURSOR:TY:VERTICAL:X1:STATE 1
4.9 CURSor Group