YOKOGAWA DL350 User Manual

4-137
IM DL350-17EN
Commands
1
2
3
4
5
App
Index
:MEASure:CYCLe?
Function Queries all cycle statistics settings.
Syntax
:MEASure:CYCLe?
:MEASure:CYCLe:ABORt
Function Aborts cyclic statistical processing.
Syntax
:MEASure:CYCLe:ABORt
Example
:MEASURE:CYCLE:ABORT
:MEASure:CYCLe:EXECute
Function Executes cyclic statistical processing.
Syntax
:MEASure:CYCLe:EXECute
Example
:MEASURE:CYCLE:EXECUTE
:MEASure:CYCLe:LOGic:BIT
Function Sets or queries the cycle trace bit of cycle
statistics.
Syntax
:MEASure:CYCLe:LOGic:BIT {<NRf>}
:MEASure:CYCLe:LOGic:BIT?
<NRf> = 1 to 8
Example
:MEASURE:CYCLE:LOGIC:BIT 1
:MEASURE:CYCLE:LOGIC:BIT?
-> :MEASURE:CYCLE:LOGIC:BIT 1
Description This command is valid only when the channel
specified by the :MEASure:CYCLe:TRACe
command is a logic input channel.
:MEASure:CYCLe:TRACe
Function Sets or queries the cycle trace of cycle statistics.
Syntax
:MEASure:CYCLe:TRACe {OWN|<NRf>[,
<NRf>]|MATH<x>}
:MEASure:CYCLe:TRACe?
First <NRf> = 1 to 7
Second <NRf> = 1 to 60 (sub channel)
<x> = 1, 2
Example
:MEASURE:CYCLE:TRACE OWN
:MEASURE:CYCLE:TRACE?
-> :MEASURE:CYCLE:TRACE OWN
:MEASure:HISTory:ABORt
Function Aborts the history statistical processing of history
waveforms.
Syntax
:MEASure:HISTory:ABORt
Example
:MEASURE:HISTORY:ABORT
:MEASure:HISTory:EXECute
Function Executes the history statistical processing of
history waveforms.
Syntax
:MEASure:HISTory:EXECute
Example
:MEASURE:HISTORY:EXECUTE
:MEASure:MODE
Function Sets or queries the type of statistical processing
for the automatically measured values of
waveform parameters.
Syntax
:MEASure:MODE {OFF|ON|CYCLe|HISTory|
STATistics}
:MEASure:MODE?
Example
:MEASURE:MODE ON
:MEASURE:MODE? -> :MEASURE:MODE ON
Description HISTory and STATistics cannot be selected in
recorder mode.
:MEASure:ONECycle
Function Sets or queries whether one cycle mode is ON or
OFF.
Syntax
:MEASure:ONECycle {<Boolean>}
:MEASure:ONECycle?
Example
:MEASURE:ONECYCLE ON
:MEASURE:ONECYCLE?
-> :MEASURE:ONECYCLE 1
:MEASure:TRANge (Time Range)
Function Sets or queries the waveform parameter
measurement range.
Syntax
:MEASure:TRANge {<NRf>,<NRf>}
:MEASure:TRANge?
 <NRf>=−5to5(div;in10div/displayrecord
length steps)
Example
:MEASURE:TRANGE -5,5
:MEASURE:TRANGE?
-> :MEASURE:TRANGE -5.000000000000,
5.000000000000
:MEASure:WAIT?
Function Waits for the completion of measurement with a
timeout period.
Syntax
:MEASure:WAIT? {<NRf>}
<NRf> = 1 to 36000 (timeout period, in units of
100 msec)
Example
:MEASure:WAIT? 100 -> 1
Description The command returns 0 if the Measurement
command finishes within the specified timeout
period. If the Measurement command does not
finish, or if it was never taking place to begin with,
the command returns 1. Even if you make the
timeout period long, 0 is returned as soon as the
Measurement command finishes.
4.22 MEASure Group

YOKOGAWA DL350 Specifications

General

Brand	YOKOGAWA
Model	DL350
Category	Recording Equipment
Language	English