YOKOGAWA DL350 - Page 170

4-143
IM DL350-17EN
Commands
1
2
3
4
5
App
Index
:SEARch:SPOint (Start POint)
Function Sets or queries the search start position.
Syntax
:SEARch:SPOint {<NRf>}
:SEARch:SPOint?
<NRf> = –5 to 5div (the resolution depends on
the record length)
Example
 :SEARCH:SPOINT−5
:SEARCH:SPOINT?
->:SEARCH:SPOINT−5.000000000000
:SEARch:TDIV<x>
Function Sets or queries a zoom waveform T/div value.
Syntax
:SEARch:TDIV<x> {<Time>|HOUR1|HOUR2|
HOUR3|HOUR4|HOUR5|HOUR6|HOUR8|HOUR10|
HOUR12|DAY1|DAY2|DAY3|DAY4}
:SEARch:TDIV<x>?
<x> = 1, 2 (sets the target zoom box)
<Time> = the same as the T/div setting
Example
:SEARCH:TDIV1 0.01
:SEARCH:TDIV1?
->:SEARCH:TDIV110.00E−03
Description This command is valid the internal clock is in
use. When an external clock is in use, use
the :SEARch:MAG<x> command to set the
magnification.
:SEARch:TIME?
Function Queries all time search settings.
Syntax
:SEARch:TIME?
:SEARch:TIME:TIME
Function Sets or queries the time of the time search.
Syntax
:SEARch:TIME:TIME {<NRf>,<NRf>,
<NRf>,<NRf>,<NRf>,<NRf>,<NRf>}
:SEARch:TIME:TIME?
First <NRf> = 2000 or greater (year)
Second <NRf> = 1 to 12 (month)
Third <NRf> = 1 to 31 (day)
Fourth <NRf> = 0 to 23 (hour)
Fifth <NRf> = 0 to 59 (minute)
Sixth <NRf> = 0 to 59 (second)
Seventh <NRf> = 0 to 999999 (microsecond)
Example
:SEARCH:TIME:TIME 2017,4,1,0,0,0,0
:SEARCH:TIME:TIME?
-> :SEARCH:TIME:TIME 2017,4,1,0,0,0,0
:SEARch:TYPE
Function Sets or queries the search type.
Syntax
:SEARch:TYPE {EDGE|EVENt|LSTate|
TIME}
:SEARch:TYPE?
Example
:SEARCH:TYPE EDGE
:SEARCH:TYPE? -> :SEARCH:TYPE EDGE
4.25 SEARch Group