YOKOGAWA DL350 User Manual

4-149
IM DL350-17EN
Commands
1
2
3
4
5
App
Index
4.31 SYSTem Group
The commands in this group deal with the system. You can perform the same operations and make the same settings
and queries that you can by using Utility > System.
:SYSTem:CLOCk?
Function Queries all date/time settings.
Syntax
:SYSTem:CLOCk?
:SYSTem:CLOCk:DATE
Function Sets or queries the date.
Syntax
:SYSTem:CLOCk:DATE <String>
:SYSTem:CLOCk:DATE?
<String > = YYYY/MM/DD
Specify the year according to the Gregorian
calendar.
YYYY: 2000 to 2099
Example
:SYSTEM:CLOCK:DATE "2017/04/01"
:SYSTEM:CLOCK:DATE?
-> :SYSTEM:CLOCK:DATE "2017/04/01"
Description Regardless of the setting that you have made
using the :SYST:CLOC:FORM command, this
command returns responses in the format shown
above.
:SYSTem:CLOCk:FORMat
Function Sets or queries the date format.
Syntax
:SYSTem:CLOCk:FORMat {<NRf>}
:SYSTem:CLOCk:FORMat?
<NRf> = 1 to 4
Example
:SYSTEM:CLOCK:FORMAT 1
:SYSTEM:CLOCK:FORMAT?
-> :SYSTEM:CLOCK:FORMAT 1
Description This command specifies the display format of the
date. (The communication response format of the
date is fixed.)
1: Year/month (number)/day
2: Day/month (number)/year
3: Day-month (English abbreviation)-year (last
two digits)
4: Day month (English abbreviation) year
:SYSTem:CLOCk:MODE
Function Sets or queries whether the date and time are
displayed.
Syntax
:SYSTem:CLOCk:MODE {<Boolean>}
:SYSTem:CLOCk:MODE?
Example
:SYSTEM:CLOCK:MODE ON
:SYSTEM:CLOCK:MODE?
-> :SYSTEM:CLOCK:MODE 1
:SYSTem?
Function Queries all system settings.
Syntax
:SYSTem?
:SYSTem:BATTery:REMain?
Function Queries the battery level (%).
Syntax
:SYSTem:BATTery:REMain?
Example
:SYSTEM:BATTERY:REMAIN?
-> :SYSTEM: BATTERY:REMAIN 50
:SYSTem:BEEP
Function Sets or queries whether a beep will sound when
an error message is displayed.
Syntax
:SYSTem:BEEP {<Boolean>}
:SYSTem:BEEP?
Example
:SYSTem:BEEP ON
:SYSTem:BEEP? -> :SYSTem:BEEP 1
:SYSTem:BSAVe
Function Sets or queries the waveform data backup saving
feature when shutting down.
Syntax
:SYSTem:BSAVe {<Boolean>}
:SYSTem:BSAVe?
Example
:SYSTem:BSAVe ON
:SYSTem:BSAVe? -> :SYSTem:BSAVe 1
:SYSTem:CHANnel<x>:SNUMber? (Serial
Number)
Function Queries the instrument number of the module at
the specified channel.
Syntax
:SYSTem:CHANnel<x>:SNUMber?
<x> = 1 to 16
Example
:SYSTEM:CHANNEL1:SNUMBER?
-> :SYTEM:CHANNEL1:SNUMBER
"111111111"
Description This command is invalid for the following modules.
701261 (UNIVERSAL),
701262 (UNIVERSAL (AAF)),
701265(TEMP/HPV),701270(STRAIN_NDIS),
701271(STRAIN_DSUB),701275(ACCL/VOLT),
720220 (16CH VOLT), 720230 (LOGIC),
720240 (CAN MONITOR)

YOKOGAWA DL350 Specifications

General

Brand	YOKOGAWA
Model	DL350
Category	Recording Equipment
Language	English