YOKOGAWA DL350 User Manual

4-153
IM DL350-17EN
Commands
1
2
3
4
5
App
Index
:SYSTem:OVERview
Function Displays the system information.
Syntax
:SYSTem:OVERview
Example
:SYSTEM:OVERVIEW
:SYSTem:RCMode (Remote Control Mode)
Function Sets or queries whether remote signals to stop
measurements will be ignored (ON) or not (OFF).
Syntax
:SYSTem:RCMode {<Boolean>}
:SYSTem:RCMode?
Example
:SYSTEM:RCMODE ON
:SYSTEM:RCMODE? -> :SYSTEM:RCMODE 1
:SYSTem:SCALefont
Function Sets or queries the font size that is used for
waveform labels and scale values.
Syntax
:SYSTem:SCALefont {SMALl|LARGe}
:SYSTem:SCALefont?
Example
:SYSTEM:SCALEFONT SMALL
:SYSTEM:SCALEFONT?
-> :SYSTEM:SCALEFONT SMALL
Description Even if you specify LARGe with this command,
depending on the display conditions, the SMALl
font may be displayed.
:SYSTem:SOITem (Scale On ITEM)
Function Sets or queries which scales are displayed.
Syntax
:SYSTem:SOITem {ALL|TSCale}
:SYSTem:SOITem?
Example
:SYSTEM:SOITEM ALL
:SYSTEM:SOITEM?
-> :SYSTEM:SOITEM ALL
:SYSTem:STORage:FORMat:EXECute
Function Formats the SD memory card. This is an overlap
command.
Syntax
:SYSTem:STORage:FORMat:EXECute
Example
:SYSTEM:STORAGE:FORMAT:EXECUTE
Description USB media cannot be formatted.
:SYSTem:TPANel:CAL:ABORt
Function Aborts touch panel calibration.
Syntax
:SYSTem:TPANel:CAL:ABORt
Example
:SYSTEM:TPANEL:CAL:ABORT
:SYSTem:TPANel:CAL:EXECute
Function Executes touch panel calibration.
Syntax
:SYSTem:TPANel:CAL:EXECute
Example
:SYSTEM:TPANEL:CAL:EXECUTE
:SYSTem:USBKeyboard
Function Sets or queries the USB keyboard type.
Syntax
:SYSTem:USBKeyboard {ENGLish|
JAPANese}
:SYSTem:USBKeyboard?
Example
:SYSTEM:USBKEYBOARD ENGLISH
:SYSTEM:USBKEYBOARD?
-> :SYSTEM:USBKEYBOARD ENGLISH
4.31 SYSTem Group

YOKOGAWA DL350 Specifications

General

Brand	YOKOGAWA
Model	DL350
Category	Recording Equipment
Language	English