YOKOGAWA DL350 User Manual

4-163
IM DL350-17EN
Commands
1
2
3
4
5
App
Index
:TRIGger[:SIMPle]:LOGic?
Function Queries all simple trigger (logic trigger) settings.
Syntax
:TRIGger[:SIMPle]:LOGic?
:TRIGger[:SIMPle]:LOGic:BIT
Function Sets or queries the bit that sets the trigger slope.
Syntax
:TRIGger[:SIMPle]:LOGic:BIT {<NRf>}
:TRIGger[:SIMPle]:LOGic:BIT?
<NRf> = 1 to 8
Example
:TRIGGER:SIMPLE:LOGIC:BIT 2
:TRIGGER:SIMPLE:LOGIC:BIT?
-> :TRIGGER:SIMPLE:LOGIC:BIT 2
:TRIGger[:SIMPle]:LOGic:SLOPe
Function Sets or queries the slope for logic triggers.
Syntax
:TRIGger[:SIMPle]:LOGic:SLOPe {FALL|
RISE}
:TRIGger[:SIMPle]:LOGic:SLOPe?
Example
:TRIGGER:SIMPLE:LOGIC:SLOPE FALL
:TRIGGER:SIMPLE:LOGIC:SLOPE?
-> :TRIGGER:SIMPLE:LOGIC:SLOPE FALL
:TRIGger[:SIMPle]:SLOPe
Function Sets or queries the trigger slope of the channel
specified by
:TRIGger:SIMPle:SOURce
for
simple triggers .
Syntax
:TRIGger[:SIMPle]:SLOPe {RISE|FALL|
BISLope}
:TRIGger[:SIMPle]:SLOPe?
Example
:TRIGGER:SIMPLE:SLOPE RISE
:TRIGGER:SIMPLE:SLOPE?
-> :TRIGGER:SIMPLE:SLOPE RISE
Description You cannot use this command to set the setting
when the trigger source is EXTernal or TIME.
:TRIGger:SIMPle:SOURce
Function Sets or queries the source for simple triggers.
Syntax
:TRIGger:SIMPle:SOURce {<NRf>[,<NRf>]|
EXTernal|TIME}
:TRIGger:SIMPle:SOURce?
First <NRf> = 1 to 7
Second <NRf> = If the channel has sub channels,
this is the range of sub channel numbers.
Example
:TRIGGER:SIMPLE:SOURCE 1
:TRIGGER:SIMPLE:SOURCE?
-> :TRIGGER:SIMPLE:SOURCE 1
:TRIGger:SOURce?
Function Queries all the settings of the trigger source for
enhanced triggers.
Syntax
:TRIGger:SOURce?
:TRIGger:SOURce:CHANnel<x1>[:SCHanne
l<x2>]?
Function Queries all the settings of the specified channel’s
trigger source for enhanced triggers.
Syntax
:TRIGger:SOURce:CHANnel<x1>[:
SCHannel<x2>]?
:TRIGger:SOURce:CHANnel<x1>[:SCHanne
l<x2>]:CENTer
Function Sets or queries the wave window trigger center
for enhanced triggers.
Syntax
:TRIGger:SOURce:CHANnel<x1>[:
SCHannel<x2>]:CENTer {<Voltage>|
<NRf>|<Current>}
:TRIGger:SOURce:CHANnel<x1>[:
SCHannel<x2>]:CENTer?
<x1> = 1 to 4
<x2> = 1 to 60 (sub channel)
Example
:TRIGGER:SOURCE:CHANNEL3:SCHANNEL1:
CENTER 1
:TRIGGER:SOURCE:CHANNEL3:SCHANNEL1:
CENTER?
-> :TRIGGER:SOURCE:CHANNEL3:
SCHANNEL1:CENTER 1.00000E+00
:TRIGger:SOURce:CHANnel<x1>[:SCHanne
l<x2>]:HYSTeresis
Function Sets or queries the specified channel’s hysteresis
for enhanced triggers.
Syntax
:TRIGger:SOURce:CHANnel<x1>[:
SCHannel<x2>]:HYSTeresis {HIGH|LOW|
MIDDle}
:TRIGger:SOURce:CHANnel<x1>[:
SCHannel<x2>]:HYSTeresis?
<x1> = 1 to 4
<x2> = 1 to 60 (sub channel)
Example
:TRIGGER:SOURCE:CHANNEL3:SCHANNEL1:
HYSTERESIS HIGH
:TRIGGER:SOURCE:CHANNEL3:SCHANNEL1:
HYSTERESIS?
-> :TRIGGER:SOURCE:CHANNEL3:
SCHANNEL1:HYSTERESIS HIGH
4.33 TRIGger Group

YOKOGAWA DL350 Specifications

General

Brand	YOKOGAWA
Model	DL350
Category	Recording Equipment
Language	English