IM 01C25T02-01E
9-8
9. PARAMETER LISTS
T0903-2.EPS
Write
Mode
Explanation
Factory
Default
Relative
Index
Parameter NameIndex
21 2521 BLOCK_TAG2 2014 (PRIMARY_
VALUE)
– Block tag which includes a parameter to be displayed on
display2
31 2531 DISPLAY_UNIT3 Null O/S User specified unit to be displayed on display3, which will be
available when "Custom" is selected at UNIT SEL3.
32 2532 EXP_MODE3 0 O/S Selection of the displayed value in exponent such as x1, x10,
x100, and x1000.
33 2533 BLOCK_TAG4 2047 (CAP_
TEMP_VAL)
– Block tag which includes a parameter to be displayed on
display4
25 2525 DISPLAY_UNIT2 Null O/S User specified unit to be displayed on display2, which will be
available when "Custom" is selected at UNIT SEL2.
26 2526 EXP_MODE2 0 O/S Selection of the displayed value in exponent such as x1, x10,
x100, and x1000.
27 2527 BLOCK_TAG3
2029 (SECONDARY_
VALUE)
– Block tag which includes a parameter to be displayed on
display3
29 2529 DISPLAY_TAG3 Null O/S Name of block tag to be displayed on display3; up to six
alphanumeric plus a slash [/] and a period [.]
35 2535 DISPLAY_TAG4 Null O/S Name of block tag to be displayed on display4; up to six
alphanumeric plus a slash [/] and a period [.]
23 2523 DISPLAY_TAG2 Null O/S Name of block tag to be displayed on display2; up to six
alphanumeric plus a slash [/] and a period [.]
24 2524 UNIT_SEL2 0 (Auto) O/S Selection of unit to be displayed. The unit of the parameter
which is selected at PARAMETER SEL2 will be displayed
when "Auto" is selected; user-specified unit at DISPLAY
UNIT2 will be displayed when "Custom" is selected.
30 2530 UNIT_SEL3 0 (Auto) O/S Selection of unit to be displayed. The unit of the parameter
which is selected at PARAMETER SEL3 will be displayed
when "Auto" is selected; user-specified unit at DISPLAY
UNIT3 will be displayed when "Custom" is selected.
22 2522 PARAMETER_
SEL2
0 (PRIMARY_
VALUE)
O/S Selection of a parameter to be displayed on display2.
Select a parameter from Table 6.1
28 2528 PARAMETER_
SEL3
1 (SECONDARY_
VALUE)
O/S Selection of a parameter to be displayed on display3.
Select a parameter from Table 6.1
34 2034 PARAMETER_
SEL4
3 (CAP_TEMP_
VAL)
O/S Selection of a parameter to be displayed on display4.
Select a parameter from Table 6.1
37 2537 DISPLAY_UNIT4 Null O/S User specified unit to be displayed on display4, which will be
available when "Custom" is selected at UNIT SEL4.
38 2038 EXP_MODE4 0 O/S Selection of the displayed value in exponent such as x1, x10,
x100, and x1000.
39 2039 BAR_GRAPH_
SELECT
1 (display) O/S Selection of bar graph indicator
36 2536 UNIT_SEL4 0 (Auto) O/S Selection of unit to be displayed. The unit of the parameter
which is selected at PARAMETER SEL4 will be displayed
when "Auto" is selected; user-specified unit at DISPLAY
UNIT4 will be displayed when "Custom" is selected.
40 2540
DISPLAY_CYCLE
7 (2.8sec) O/S Duration of display cycle. (Time unit: 1=400msec)
41 2541 TEST40 0 – Not used for EJX
20 2520 EXP_MODE1 0 O/S Selection of the displayed value in exponent such as x1, x10,
x100, and x1000.
To Next Page
Loading...
