YOKOGAWA FX112 User Manual

10-5
IM 04L20A01-01E
Troubleshooting
10
Code Message
283 FTP command was not accepted.
Further details are provided by the character string that appears after error code 283.
Character String and Details
USER
Failed user name verification.
Check the user name setting.*
1
PASS
Failed password verification
Check the password setting.*
1
ACCT
Failed account verification.
Check the account setting.*
1
TYPE
Failed to change the transfer type.
Check that the server supports the binary transfer mode.
CWD
Failed to change the directory.*
1
Check the initial path setting.
PORT
Failed to set the transfer connection.
Check that the security function is disabled.
PASV
Failed to set the transfer connection.
Check that the server supports PASV commands.
SCAN
Failed to read the transfer connection settings.
Check that proper response to the PASV command is received from the server.
284 FTP transfer setting error.
Further details are provided by the character string that appears after error code 284.
Character String and Details
MODE
Internal processing error.*
2
LOCAL
Internal processing error.*
2
REMOTE
The destination file name is not correct.
Check that you have the authority to create or overwrite files.
ABORT
File transfer abort was requested by the server.
Check the server for the reason for the abort request.
10.1 A List of Messages

YOKOGAWA FX112 Specifications

General

Brand	YOKOGAWA
Model	FX112
Category	Controller
Language	English