YOKOGAWA FX112 User Manual

10-7
IM 04L20A01-01E
Troubleshooting
10
• Memory Access Errors during Setting and Basic Setting Modes and Output
Communication Command Execution
An English error message is returned via the communication interface. It is not
displayed on the screen.
Code Message
360 Output interface must be chosen from Ethernet or RS by using ‘XO’ command.
361 Memory data has not been saved to the communication output buffer.
362 There are no data to send ‘NEXT’ or ‘RESEND’.
363 All data have already been transferred.
• Maintenance and Test Communication Command Errors
An English error message is returned via the communication interface. It is not
displayed on the screen.
Code Message
390 Command error.
391 Delimiter error.
392 Parameter error.
393 No permission.
394 No such connection.
395 Use ‘quit’ to close this connection.
396 Failed to disconnect.
397 No TCP control block.
• Other Communication Errors
An English error message is returned via the communication interface. It is not
displayed on the screen.
Code Message
400 Input username.
401 Input password.
402 Select username from ‘admin’ or ‘user’.
403 Login incorrect, try again!
404 No more login at the specified level is acceptable.
420 Connection has been lost.
421 The number of simultaneous connection has been exceeded.
422 Communication has timed-out.
Note
For information regarding the communication function of the FX100, see the “ FX100
Communication Interface User’s Manual ” (IM 04L20A01-17E).
10.1 A List of Messages

YOKOGAWA FX112 Specifications

General

Brand	YOKOGAWA
Model	FX112
Category	Controller
Language	English