YOKOGAWA STARDOM FCN-RTU - User Manual

Technical
Information
STARDOM
Engineering Guide (FCN-500/FCN-RTU)
TI 34P02K35-02E
TI 34P02K35-02E
© Copyright Apr. 2016 (YK)
1st Edition Apr.28.2016 (YK)
3rd Edition Jun. 6.2018 (YK)

YOKOGAWA STARDOM FCN-RTU Specifications

General

Model	FCN-RTU
Category	Controller
Input Voltage	24 VDC
Humidity Range	5 to 95% RH (non-condensing)
Enclosure Rating	IP20
Type	Remote Terminal Unit
Communication Protocols	Modbus, Ethernet/IP, DNP3, IEC 60870-5-101/104
Communication Interfaces	RS-232, RS-485, Ethernet
Input/Output	Digital and Analog I/O
Power Supply	24 VDC
Operating Temperature	-20 to 60 °C
Programming Languages	ST (Structured Text), LD (Ladder Diagram), FBD (Function Block Diagram)

Summary

2. Basic Design and Function Design

2.2 Pre-Application Creation Checklist

Covers essential checks on tools, revisions, and application size before starting development.

3. Hardware Setup

3.1 Resource Configurator Setting

Details configuration items managed via the Resource Configurator tool for hardware setup.

4. Control Application Creation

4.1 Using Logic Designer Setup

Covers initial setup, project selection, and template choices within Logic Designer.

4.2 Application Programming Languages

4.8 Precautions About Downloading

4.9 Control Application Backup

5. Function Test (Debugging)

5.1.1 Precautions of Testing When Using In-house Equipment

5.4 Combination Test Precautions

5.5 Checking CPU Load and Application Size

5.5.1 Checking CPU Load

Provides steps to monitor and verify CPU load, ensuring it remains within acceptable performance limits.

5.6 Logic Designers Debug Mode

5.6.1 Switching to Debug Mode

6. User Acceptance Test (UAT)

6.1 Pre-UAT Checklist

7. System Delivery Precautions

7.1 System Delivery Checklist

Provides a checklist of items to verify before system delivery to ensure a smooth handover.

8.4 Criteria for Selecting Programming Languages in Logic Designer

9.1.5 Inter-FCNFCJ Communication Concept

9.1.12 Logic for Saving Retain Data