<9. Advanced Engineering >
9.1.13 Comparing Logic Designer Projects
Logic Designer R2.01.01 and later versions allow two projects on a PC to be
compared easily. The comparison detects differences in code worksheets, variable
worksheets and data worksheets, and is useful both during application development
and maintenance.
Before comparing projects, they must be compiled. Comments within programs are
excluded from comparison. Moreover, a program running on a controller cannot be
compared. For details, read Logic Designer’s online help documentation.
Logic Designer R4.02.01 and later versions allow a project on a PC and a project on
FCN-500 or FCN-RTU to be compared. For compared, please download the project
to turn on the "project comparison function".
1. Turn ON the “Project Compare” in the option.
2. Download the project to FCN-500 or FCN-RTU. (*1)
3. Select the “Project Comparison” of the “Project menu”, and compare it.
*1: If the “project comparison” is "ON", the operation will be slowed. When
debugging usually is, turn OFF the “Project Comparison”.
To Next Page
Loading...
Need help?
General
