<6. User Acceptance Test>
6.1.2 UAT Implementation Guidelines
Verify that the following guidelines are observed in UAT implementation using the
following checklist.
• Ample time must be allowed for function test.
Compare the UAT schedule against the size of created control applications, and
verify that ample time is reserved for function tests.
• The list of test items must be complete.
Verify that all created control applications are included within the list of test
items.
If not all items are included, clarify which items are excluded from UAT and
confirm when and how they will be tested.
• Test procedures must be thorough.
Verify that the test procedures for all control applications to be tested during UAT
ensure thorough testing of their functions.
Specifically, verify that other than normal execution paths, exception paths are
also tested.
• System failure test
Among the test items described in Section 5.4.4, “System Failure Test,” confirm
which are to be implemented in UAT.
For items not to be tested, confirm when and how they will be tested.
SEE ALSO
For details on system failure test, see Section 5.4.4, “System Failure Test.”
• Differences between equipment used in UAT and the actual system
If there are differences in the equipment to be used in user acceptance test and
the actual system, explain this to the user beforehand.
SEE ALSO
For more details, see Section 6.2, “Items Requiring Prior Explanation to Users.”
To Next Page
Loading...
Need help?
General
