IM 04L20A01-01E
1-29
1
Explanation of Functions
File Name
• Mddhhmm denotes the date and time.
Mddhhmm of setup data and screen image data is the date and time the file was
created.
Mddhhmm of other data is the date and time the first data was sampled.
M: Month (1 to 9, X (October), Y (November), Z (December), dd: day, hh: hour,
mm: minute
• “a” denotes the last digit of the year (0 to 9).
However, “a” becomes a sequence number for the following case. It takes a value
between A and Z.
For example, if the acquisition of the display data is started and stopped, and started
again within 1 minute by pressing the START key, the two file names are the same up
to Mddhhmm (month, day, hour, and minute). In this case, the second file is assigned
the sequence number A.
Example:
70112563.DDS
7011256A.DDS
Two display data files which sampling started on July 1st, 2003 at 12:56.
File Creation
The display data, event data, manual sampled data, TLOG data (/M, /PM1 option),
and report data (/M, /PM1 option) are temporarily written to the internal memory. Data
files are created when the data in the internal memory is saved to the external storage
medium.
Note
A backup should be made of the data on the external storage medium.
1.5 Data Storage Function
To Next Page
Loading...
Need help?
General
