EasyManuals Logo

YOKOGAWA GX60 User Manual

YOKOGAWA GX60
590 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #537 background imageLoading...
Page #537 background image
4
All Rights Reserved. Copyright © 2012, Yokogawa Electric Corporation
GS 04L51B01-01EN Nov. 10, 2015-00
• Datasize;
Analoginputdata:12bytes/ch.
DigitalI/Odata:4bytes/ch.
Pulse input data: 12 bytes/ch.
Math channel data: 12 bytes/ch.
Communication channel data: 12 bytes/ch.
• Filesize:Upto18MB
• NumberoflesforGX10,GX20-1:Upto500
(includingeventdata),forGX20-2;Upto1000
(including event data)
Operationintheinternalmemory:FIFO(FirstIn
FirstOut)
• Dataformat:Binaryortext
• Recording:Recordsdataatalltimes.
• Displaydatalesampletime
Measurement channel = 30. Math Channel = 0
InternalMemory 500 MB
Trend interval (minute/div) 30 minutes
Recording interval (s) 60 s
Total sample time
Approx.2.5years
Eventdata:
• Target:Measurement(input/outputmodule)/
math/communication channels, alarm summary,
message summary, operation log
Description:Instantaneousvalueperrecording
interval
• Recordingintervals:Determinedbythesample
rate, recording data type (display data/display
data+eventdata,GX20-2)
For GX20-1
Samplingrate Numberofchannels
100 ms 100
200 ms 200
500 ms or longer 500
For GX20-2
Trendinterval(div) Numberofchannels
Display
data
Displaydata+
Eventdata
100 ms 500 100
200 ms 500 200
500 ms 1000 500
1 s or longer
1000 1000
Notethatthemaximumnumberofchannelsis
xedat100intheGX10.
• Datasize;
Analoginputdata:6bytes/ch.
DigitalI/Odata:2bytes/ch.
Pulse input data: 6 bytes/ch.
Math channel data: 6 bytes/ch.
Communication channel data: 6 bytes/ch.
• Filesize:Upto18MB
• NumberoflesforGX10,GX20-1:Upto500
(includingdisplaydata),forGX20-2;Upto1000
(including display data)
• Operationintheinternalmemory:FIFO(FirstIn
FirstOut)
• Dataformat:Binaryortext
• Mode;Free:Recordsdataatalltimes.
Trigger: Starts recording data when a
certaineventoccursandrecordsforthe
speciedinterval.
Repetition trigger: Repeat Trigger mode
• Eventdatalesampletime
Measurement channel = 30. Math Channel = 0
InternalMemory 500 MB
Recording interval (s) 1 s
Total sample time
Approx.1month
AlarmFunctions
• Numberofalarms:Uptofouralarms(level)for
each measurement channels
• Alarmtype:Highlimit,lowlimit,differencehigh
limit,differencelowlimit,highlimitonrate-of-
changealarm,lowlimitonrate-of-changealarm,
delay high limit, and delay low limit
• Alarmdelaytime:1sto24hours(foreach
channel)
• Rate-of-changecalculationintervalofrate-of-
change alarms: 1 to 32 times the scan interval
(common to all channels)
• Hysteresis:0.0to5.0%ofthespan(foreach
alarm (level))
• Alarmoutput:Outputtotheinternalswitch
Internalswitchoperation:AND/ORoperation
selectable
• Display:Displaysthestatusontherespective
operation screen and an alarm icon on the status
display section when an alarm occurs.
Displayoperation:Holdornotholdthedisplay
until the alarm acknowledge operation
• Alarmhidefunction(alarmnologgingfunction)
Not display alarms nor record to the alarm
summary(foreachchannel)
• Alarminformation:Displaysalogofalarm
occurrences on the alarm summary
• Reash:Thedurationforwhichthereashrelays
are deactivated can be set to 500 ms, 1 s, or 2 s.
• IndividualalarmACKfunction:
Alarmdisplayandrelayoutputcanbecancelled
on individual alarms
EventActionFunctions
• Eventaction:Executeaspeciedoperation
when a given event occurs.
• Numberofsettings:50
Events: Remote control input, etc.
Timer;Numberoftimers:12
Matchtimetimer;Numberoftimers:12
Action:Specifymemorystart/stop,alarmACK,
etc.
SecurityFunctions
• Operationlockfunction:Limitationstotouch
operation,accesstotheexternalstorage
medium, and various operations
• Loginfunction:Onlyregistereduserscan
operate the GX.
Itcanbesettoeachoftouchoperationand
communication access.
System administrators and Users: 50 (totally)
NumberofAuthorityofuser:10level

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the YOKOGAWA GX60 and is the answer not in the manual?

YOKOGAWA GX60 Specifications

General IconGeneral
BrandYOKOGAWA
ModelGX60
CategoryVoice Recorder
LanguageEnglish

Related product manuals