Handling Precautions of the GX/GP
• Use care when cleaning this instrument, especially
its plastic parts. Use a soft dry cloth. Do not use
organic solvents, such as benzene or thinner, or
other cleansers. They may cause discoloring and
deformation.
• Keep electrically charged objects away from the signal
terminals. Failure to do so may damage the GX/GP.
• Do not apply volatile chemicals to the display, panel
keys, etc. Do not allow rubber and vinyl products to
remain in contact with the GX/GP for long periods of
time. Doing so may damage the GX/GP.
• When not in use, make sure to turn off the power
switch.
• If there are any symptoms of trouble such as strange
odors or smoke coming from the GX/GP, immediately
turn off the power switch and the power supply source.
Then, contact your nearest Yokogawa dealer.
SD Memory Card Handling Precautions
• SD memory cards are delicate and should be handled
with caution.
• Yokogawa provides no warranty for damage to, or loss
of data recorded on the SD memory card, regardless
of the cause of such damage or loss. Please always
make backup copies of your data.
• Do not store or use the SD memory card in places with
static electricity, near electrically charged objects, or
where electrical noise is present. Doing so can result in
electric shock or damage.
• Do not disassemble or modify the SD memory card.
Doing so can result in damage.
• Do not physically shock, bend, or pinch the SD memory
card. Doing so can lead to malfunction.
• During reading/writing of data, do not turn OFF the
power, apply vibration or shock, or pull out the card.
Data can become corrupt or permanently lost.
• Only use Yokogawa SD memory cards. Operation
cannot be guaranteed with other brands of card.
• When inserting the SD memory card into the
instrument, make sure you orient the card correctly
(face up or down) and that you insert it securely. If not
inserted correctly, the card will not be recognized by
the instrument.
• Never touch the SD memory card with wet hands.
Doing so can lead to electric shock or malfunction.
• Never use the SD memory card if it is dusty or dirty.
Doing so can lead to electric shock or malfunction.
• The SD memory card comes formatted.
SD cards must be formatted according to the standard
established by the SD Association (https://www.sdcard.
org/home). If you want format the SD memory card,
use the instrument’s Format function. If using a PC
to perform the formatting, use the SD card formatter
software available from the above SD Association.
• You can use SD/SDHC cards (up to 32 GB) on the GX/
G P.
SD Memory Card Specifications and Characteristics
Electrical specifications Operating voltage: 2.7 V to 3.6 V (memory
operation)
Operating temperature /
humidity conditions
–25 to 85°C / 20 to 85% RH, no condensation
Storage temperature /
humidity conditions
–40 to 85°C / 5 to 95% RH, no condensation
Unit: mm
32 ± 0.1
24 ± 0.1
WP
SD
Writable
Write-protected
Checking the Package Contents
After receiving the product and opening the package,
check the items described below. If the wrong items
have been delivered, if items are missing, or if there is a
problem with the appearance of the items, contact your
nearest Yokogawa dealer.
Check that the product that you received is what you
ordered by referring to the model name and suffix code
given on the name plate on the GX/GP.
NO. (Instrument Number)
When contacting the dealer from which you purchased the
instrument, please give them the instrument number.
To Next Page
Loading...
