YOKOGAWA ProSafe-RS

3. Cabling
3-76
TI 32P01J10-01EN
 Di󰀨erentiation between BUS 1 and BUS 2
Use di󰀨erent colors, etc., to di󰀨erentiate between BUS 1 and BUS 2.
 Destination Display
Attach a display tag at the tip of cables to indicate the station number, switch number, and port
number of the destination.
 Cable Fixing
Fix cables securely so that their connectors are not exposed to undue stress.
 Handling of Vnet/IP Cables Connected to the Processor Module (SCP461/
SCP451)
• Turn the power on after connecting the cables to the SCP461/SCP451.
• When removing the SCP461/SCP451 on-line, remove it with the cable connected to it.
• Before installing the SCP461/SCP451 on-line, connect a cable to it.
 Handling communication module for V net router (VI451) of Duplexed V net
router (AVR10D) and connecting cable
• Switch on after connecting a cable to VI451.
• Remove VI451 on line with a cable connected to VI451.
• Attach VI451 on line after connecting cable to VI451.
Handling VI702 and connecting cable
• Do not power on PC until a cable is attached.
• Power o󰀨 PC rst to remove a cable.
Oct. 25, 2016-00