YOKOGAWA ProSafe-RS - Page 206

ii
TI 32P01J10-01E
[Mounting conditions are corrected.]
Example of Mounting N-IO Nodes (Non-Intrinsic Safety Barrier) in a Cabinet
[Mounting conditions are corrected.]
Example of Mounting N-IO Nodes (Intrinsic Safety Barrier) in a Cabinet
[Mounting conditions are corrected.]
3.5 Figure Area for Signal Cable from Field is revised.
Figure Example of Node Interface Unit and I/O Unit Cable Wiring (Cabinet) is revised.
Figure Example of Node Interface Unit and I/O Unit Cable Wiring (Junction Box) is revised.
Nov. 2017/5th Edition
1.2 S2LP131 is added.
1.7 S2LP131 is added.
1.8 Clerical error correction.
2.3 Notice for storage is added.
3 Figure of SBM54D is revised.
3.6.2 S2LP131 is added.
4. S2LP131 is added.
Clerical error correction.
June 2017/4th Edition
1.2 Safety Standards [CSA] is revised.
1.8 Clerical error correction.
3.2 Clerical error correction.
3.5 Clerical error correction.
3.8.3 Notice for N-ESB bus is revised.
Apr. 2017/3rd Edition
1.2 Clerical error correction.
1.5.1 Example of spark-killer installation for N-IO is added.
1.7 S2MDV843 is added.
1.8 S2MDV843 is added.
3.2 Clerical error correction.
3.7 S2MDV843 is added.
Clerical error correction.
Oct. 2016/2nd Edition
Safety Precautions [Symbol denitions were revised]
Symbol Marks of this Technical Information [Symbol marks were chaged]
1. System Installation Requirements
1.2 Control Room Environment
Installation Specication [Alt. 3000m was added]
Applied Standards
EMC Conformity Standards [The errors on notes were corrected]
Standard for Hazardous (Classied) Locations [Standards were added]
Marine Standards [DNV GL was added]
Installation Environment Specications
Table Installation Environment Specications [Alt. 3000m was added]
1.8 Compliance with Marine Standards [DNV GL was added] [N-IO models were added]
Table Marine Standard-compliant ProSafe-RS Components
[The su󰀩x code limitation was added to AVR10D]
2. Transportation, Storage and Installation
2.5 Installation
2.5.3 DIN Rail Mountable Devices [Models were added]
2.5.4 Wall Mountable Devices [Mounting method of S2BN4D was revised]
[Grounding method was revised]
2.5.6 Installation Guidelin for Cabinet (N-IO) [Section was added]
Nov. 2015/1st Edition
Newly published
Mar. 29, 2019-00