Yongnuo YN-622C User Manual

Manual / Multi Flash Flash
16
1.Manual Flash: Manually set flash output
(1/128~1/1 power 1/3-stop increments)
Select flash mode as Manual Flash Mode, setting
flash output ,shutter sync, zoom etc.
2.Multi Flash (Stroboscopic flash)

camera menu.
Select flash mode as Multi Flash, setting via the
! The three parameters of flash output, frequency,
and flash count may restrain each other, setting
details may be referred to user manual of flash
manufacturer. Factual output shall be subject to
the flash’s screen display.
Items Parameter
Flash Output Manual（Max1/4）
Frequency 1-199hz
Flash count 1-100times
zoom Auto/Manual（24-105mm）

Yongnuo YN-622C Specifications

Power

battery type	2x AA batteries (1.5v Alkaline or 1.2v NiMH)
standby time	60 hours
max safe trigger voltage on hot-shoe centre pin	6 volts

Connectors

canon hot foot	with locking ring and pin
canon hot shoe	for mounting hot-shoe flash
pc-sync screwlock socket	sync out only

Weight and Dimensions

dimensions	90 x 53 x 25mm (39mm incl. hot-foot)
weight	79gm without batteries