Yongnuo YN-622C User Manual

List of Type A cameras
Canon EOS 5D Mark II/5DMark III,1Ds Mark III,1D Mark
IV/1D Mark III,7D,60D, 50D,40D
/650D/600D/550D/500D/450D/1100D/1000D
List of Type B cameras
Canon EOS 5D,10D,20D,30D,300D,350D,1D,1D Mark II
Compatible ETTL flash list (support wireless remote
control through camera menu)
Canon 600EX(RT)/580EXII/430EXII/320EX/270EXII
YongNuo YN565C/YN468C(II)/YN467C(II)/YN465C
430EX/580EX or other parts of the flash is not
supported remote control via the camera menu, need
to manually set the flash parameters.
※ When using general type manual flash or strobe
flash connect to PC port, flash output needs to be
set manually.
※ In this user manual, assumes that you are using the
type A camera and compatible ETTL flash, as for
type B/ C camera, please refer to page 22.
Compatibility List
4
Functions supported by the product depend on the
camera and flash used. According to different types of
cameras, in this user manual, the EOS DSLR camera
with external flash(speedlite) control menu is called
; while EOS DSLR camera without
external flash control menu is called ;
other camera brands with standard hot-shoe is called
.
type A camera
type B camera
type C camera

Yongnuo YN-622C Specifications

Power

battery type	2x AA batteries (1.5v Alkaline or 1.2v NiMH)
standby time	60 hours
max safe trigger voltage on hot-shoe centre pin	6 volts

Connectors

canon hot foot	with locking ring and pin
canon hot shoe	for mounting hot-shoe flash
pc-sync screwlock socket	sync out only

Weight and Dimensions

dimensions	90 x 53 x 25mm (39mm incl. hot-foot)
weight	79gm without batteries