Yongnuo YN-622C User Manual

System type: Digital FSK 2.4GHz wireless transceiver
Distance: 100M
Channel: 7
Flash mode: E-TTL(II), Manual flash, Multi flash
Sync mode: 1st curtain, 2nd curtain, Hi-speed sync
Groups: 3Groups (A/B/C)
Sync speed: 1/8000s*
Input: Hot-shoe(TTL,main contact)
Output: Hoe shoe, PC port
Applicable battery: AAX2 (support 1.2 V rechargeable
battery)
Stand-by time: 60h
Dimensions: 89.5×53×39mm
Weight:78g
* Sync speed of part of cameras and flashes may be
lower.
※ All of the specification parameters are base on test
conditions of our company. All registered trademarks
are the property of their respective owners in this
usermanual. Specifications subject to change without
notic.
Specifications
28

Yongnuo YN-622C Specifications

Power

battery type	2x AA batteries (1.5v Alkaline or 1.2v NiMH)
standby time	60 hours
max safe trigger voltage on hot-shoe centre pin	6 volts

Connectors

canon hot foot	with locking ring and pin
canon hot shoe	for mounting hot-shoe flash
pc-sync screwlock socket	sync out only

Weight and Dimensions

dimensions	90 x 53 x 25mm (39mm incl. hot-foot)
weight	79gm without batteries