E-TTL II flash metering
For normal exposures, set it to [Evaluative]. If [Average] is set,
the flash exposure will be averaged for the entire scene
metered by the camera. Flash exposure compensation may be
necessary depending on the scene. This setting is for
advanced users.
Flash synchronization speed in Av mode
You can set the flash sync speed when performing wireless
flash shooting in aperture-priority AE (AV) mode.
Flash mode
You can select the flash mode from [E-TTL II], [Manual flash],
[MULTI flash] and [Individual group control] to suit your
desired flash shooting.
Shutter synchronization
You can select the flash firing timing/method from [1st
curtain] and [High-speed synchronization]. To perform
normal wireless flash shooting, set it to [1st curtain].
Flash exposure compensation
In the same way as normal exposure compensation, you can
set exposure compensation for flash. The flash exposure
compensation amount can be set up to ±3 stops in 1/3-stop
increments.
FEB
You can take three shots while automatically changing the
flashoutput. The settable range is up to ±3 stops in 1/3-stop
increments.
Wireless flash functions (setting)
R a d i o t r a n s m i s s i o n w i re l e s s f l a s h s h o o t i n g i s s e t
automatically.
Clear Speedlite (function) settings
You can return the transmitter settings to their default
settings.
23
Transmitter Control from Camera’s Menu Screen
To Next Page
Loading...
Need help?
General
