Gr: Shooting with a Different Flash Mode for Each Group
A
B
C
E
D
Ext.A
E-TTL II
Y o u c a n s h o o t w i t h a
different flash mode set for
each firing group, with up to
5groups (A/B/C/D/E).
The flash modes that can be
s e t a r e E - T T L I I / E - T T L
autoflash, Manual flash and
Auto external flash metering.
This function is for advanced
u s e r s w h o a r e v e r y
knowledgeable and experienced
in lighting.
When using the <Gr> flash mode of the camera
released from 2007 to 2011, all the parameters
should be set up through the speedlite transmitter.
1.Set the flash mode to <Gr>.
Press the <mode> button on
the master unit and set the flash
mode to<Gr>.
2.Set the firing group on the
slave units.
Operate and set the slave
units one by one.
Set a firing group (A/B/C/D/E)
for all the slave units.
18
* The flash mode settings
are indicated only as an
example.
Manual
Flash
Manual
Flash
Manual
Flash
To Next Page
Loading...
Need help?
General
