You can perform remote release (remote
control shooting) from a flash set as a
slave unit. (see the flash’s instruction
manual).
*When using the function with the cameras released until
2011, it needs the shutter release cable LS-MINIB/C3 or
LS-MINIB/C1(sold separately). As for the EOS digital
cameras(such as EOS-1D X) released after 2012, it does
not need the shutter release cable.
Remote Release from a Slave Unit/Linked Shooting
Remote Release from a Slave Unit*
20
Linked shooting*
Linked shooting is a function that automatically releases the
shutter of a slave unit camera by linking it to a master unit
camera. You can shoot with linked shooting for up to 16
units, including both master units and slave units. This is
convenient when you want to shoot a subject from multiple
angles at the same time.
To shoot with linked shooting, attach a flash that supports
radio transmission wireless shooting or the Speedlite
Transmitter YN-E3-RT to the camera.
Slave unit camera
Transmission
distance
Approx. 100 m
Slave unit camera
Slave unit camera
Slave unit camera
Master unit
camera
To Next Page
Loading...
Need help?
General
