Yongnuo YN560 User Manual

19
．
Power switch
:
Switch t
he flash light
on/off
by
holding
this button
down
for 2
seconds.
20．Power adjustment button: Adjust the power output major steps by
pressing the
[LEFT] [RIGHT] buttons of the main control, and make fine tune power changes by
pressing [UP] [DOWN] and then press [OK] in the middle to set fine tune setting.

Yongnuo YN560 Specifications

General

Zoom Range	24-105mm
Recycle Time	Approx. 3 seconds
Power Source	4 x AA batteries (alkaline or Ni-MH)
Color Temperature	5600K
Flash Modes	Multi
Swivel Angle	270 degrees
Tilt Angle	0-90 degrees
Wireless Triggering	Yes
Manual Power Levels	1/1 to 1/128