5126744-UIM-D-1015
12 Johnson Controls Unitary Products
FIGURE 8: Single Point Wiring Kits
NOTE:
For single circuit heater kits,
remove the wires for the second
circuit from the single-point block.
(Mount with 4 self tapping
screws as shown.)
A0352-003
FOR USE WITH THE FOLLOWING HEARTER KITS
Heater Kit No. kW 208/240 Volts Amps 208/240
6HK16500206 1.8/2.4 280/240 8.7/10.0
6HK16500506 3.6/4.8 280/240 17.3/20.0
6HK16500806 5.76/7.68 280/240 27.7/32.0
6HK16501006 7.2/9.6 280/240 34.6/40.0
6HK16501306 9.36/12.48 280/240 45.0/52.0
6HK16501506 10.8/14.4 280/240 51.9/60.0
6HK16501806 12.96/17.28 280/240 62.3/72.0
6HK16502006 14.4/19.2 280/240 89.2/80.0
TO L1 on HEAT KIT BREAKER(S)
TO L2 on HEAT KIT BREAKER(S)
TO HEAT KIT GROUND LUG
Single Point K it P/N U nit Model Number Breaker Size Heat Kit
S1-2SPWK008 PCE4A24 20 Amp up to 13 kW
S1-2SPWK006 PCE4A30 25 Amp up to 15 kW
S1-2SPWK001 PCE4A36 30 Amp up to 15 kW
S1-2SPWK006 PHE4A24 25 Amp up to 13 kW
S1-2SPWK002 PHE4A30 35 Amp up to 15 kW
S1-2SPWK007 PHE4B36 40 Amp up to 15 kW
S1-2SPWK003 PCE4A42 45 Amp up to 20 kW
S1-2SPWK003 PHE4B42 45 Amp up to 20 kW
S1-2SPWK004 PCE4B48 50 Amp up to 20 kW
S1-2SPWK004 PHE4B48 50 Amp up to 20 kW
S1-2SPWK005 PCE4B60 60 Amp up to 20 kW
S1-2SPWK005 PHE4B60 60 Amp up to 20 kW
To Next Page
Loading...
Need help?
General
