JOHNSON CONTROLS
104
FORM 155.30-ICOM2.EN.UL
ISSUE DATE: 12/21/2018
SECTION 6 – OPERATION
• Screen Name Buttons: Located along the bottom
of the screen. These are used to change screens.
The selected button lights when it is active.
CHANGE NUMERIC VALUES
Many numeric values, such as the set point and the
ranges on the Trend screen, can be changed. Here’s
how:
1. Touch the number to be changed. A numeric key-
pad appears.
LD21976_UL
2. Enter the new value on the keypad.
3. Press the ENT button to set it the new value.
To Next Page
Loading...
