York YHAU-CL Series - FIGURE 4 - Moving the Machine on Rollers; FIGURE 5 - Fitting TIR-Rollers to the Machine

JOHNSON CONTROLS
24
FORM 155.30-ICOM2.EN.UL
ISSUE DATE: 12/21/2018
SECTION 3 – HANDLING, STORAGE, INSTALLATION AND REASSEMBLY
LD22924_UL
Maximum Machine Width
Maximum Machine Length
Maximum Machine Height
Skid Base
Approx.
Approx
.
Approx.
3.93 3.93
3.93
7.86
7.86
15.72
FIGURE 4 - MOVING THE MACHINE ON ROLLERS
LD22923
TIR-ROLLER SET
TIR-ROLLER SET
ANCHOR BOLT HOLE
HOLE { 22} FOR FITTTING
TIR-ROLLER SET
MACHINE BASE
FIGURE 5 - FITTING TIR-ROLLERS TO THE MACHINE