JOHNSON CONTROLS
26
FORM 155.30-ICOM2.EN.UL
ISSUE DATE: 12/21/2018
SECTION 3 – HANDLING, STORAGE, INSTALLATION AND REASSEMBLY
Operate the front and rear jacks alternately.
Do not jack up the machine more than about 0.78 inch
at a time. Each time the machine is jacked up, adhere it
with a suitable crosstie.
LD22927_UL
JACK-UP
JACK-UP
CROSSTIE
0.78 inch
0.78 inch
FIGURE 7 - JACK-UP PROCEDURES
To Next Page
Loading...
