JOHNSON CONTROLS
21
FORM 155.30-ICOM2.EN.UL
ISSUE DATE: 12/21/2018
3
SECTION 3 – HANDLING, STORAGE, INSTALLATION AND REASSEMBLY
This chiller is for air conditioning or a cooling manu-
facturing process. Transport, store, and use this chiller
under the following conditions:
Installation location Indoor, Non-explosion area
Ambient temperature 50 ~ 104°F
Humidity 10 ~ 90% (RH%)
Altitude 3333 feet or lower
If the plant room will ever drop below 50°F, you must
have the cold ambient option for outdoor installation.
LD18119
DANGER: Rigging and lifting should
only be done by a professional rigger in
accordance with a written rigging and
lifting plan. The most appropriate method
will depend on job specic factors, such as
the rigging equipment available and site
needs. Therefore, a professional rigger
must determine the rigging and lifting
method to be used, and it is beyond the
scope of this manual to specify rigging
and lifting details.
CAUTION: This unit CANNOT be lifted
or moved using a forklift. Warning
To Next Page
Loading...
