JOHNSON CONTROLS
3
FORM 160.84-OM1
ISSUE DATE: 9/21/2017
CHANGEABILITY OF THIS DOCUMENT
In complying with Johnson Controls’ policy for contin-
uous product improvement, the information contained
in this document is subject to change without notice.
Johnson Controls makes no commitment to update or
provide current information automatically to the man-
ual owner. Updated manuals, if applicable, can be ob-
tained by contacting the nearest Johnson Controls Ser-
vice office or accessing the Johnson Controls QuickLIT
website at http://cgproducts.johnsoncontrols.com.
Operating/service personnel maintain responsibility for
the applicability of these documents to the equipment.
If there is any question regarding the applicability of
these documents, the technician should verify whether
the equipment has been modified and if current litera-
ture is available from the owner of the equipment prior
to performing any work on the chiller.
CHANGE BARS
Revisions made to this document are indicated with a
line along the left or right hand column in the area the
revision was made. These revisions are to technical in-
formation and any other changes in spelling, grammar
or formatting are not included.
ASSOCIATED LITERATURE
MANUAL DESCRIPTION FORM NUMBER
Installation and Reassembly 160.84-N1
Unit Installation Checklist and Request for Startup 160.84-CL1
Unit Startup Checklist 160.84-CL2
Field Connections Diagram 160.84-PW1
Field Control, Wiring and MBC Diagrams 160.84-PW2
Field Connections with MV Electro-Mech Starters 160.84-PW3
Electro-Mechanical Starter 160.84-PW4
Unit Replacement Parts - YMC
2
Mod B 160.84-RP1
Unit Replacement Parts - YMC
2
Mod B with M6 Compressor 160.84-RP2
VSD Replacement Parts 160.84-RP3
Centrifugal Chiller Long Term Storage 50.20-NM5
All Products - Replacement Parts Electrical Connectors 50.20-RP1
All Products - Replacement Parts Fittings 50.20-RP2
To Next Page
Loading...
