JOHNSON CONTROLS
76
FORM 160.84-OM1
ISSUE DATE: 9/21/2017
SECTION 3 - OPTIVIEW™ CONTROL CENTER FUNCTIONS AND NAVIGATION
OVERVIEW
This screen allows up to 10 Service Technician select-
ed parameters to be displayed. These parameters are
selected from a list on the Custom View Setup Screen.
This allows the Service Technician to display param-
eters pertinent to a particular problem during trouble-
shooting. At completion of the service call, the display
can be cleared or the parameters can be left there for
monitoring by operations personnel.
DISPLAY ONLY
This screen display attributes assigned to Custom
screen. There are no other display options.
PROGRAMMABLE
Print
This generates a listing of the parameters displayed on
this screen.
NAVIGATION
Home
Causes an instant return to the Home Screen.
History
Causes an instant return to the History Screen.
Setup
Access Level Required: OPERATOR
Causes a jump to the subscreen that allows selection of
the parameters to be displayed.
CUSTOM SCREEN
LD17947a
FIGURE 30 - CUSTOM SCREEN
To Next Page
Loading...
