Zanussi ZDLN2621 - Spray Arm Cleaning; Cleaning the Lower Spray Arm; Cleaning the Upper Spray Arm; Cleaning the Ceiling Spray Arm

8. Put back the filter (B) in the flat filter (A). Turn it
clockwise until it locks.
CAUTION! An incorrect position of
the filters can cause bad washing
results and damage to the appliance.
CLEANING THE LOWER SPRAY ARM
We recommend to clean the lower spray arm
regularly to prevent soil from clogging the holes.
Clogged holes can cause unsatisfactory washing
results.
1. To remove the lower spray arm, pull it upwards.
2. Wash the spray arm under running water. Use
a thin pointed tool, e.g. a toothpick, to remove
particles of soil from the holes.
3. To install the spray arm back, press it
downwards.
CLEANING THE UPPER SPRAY ARM
Do not remove the upper spray arm. If the openings
in the spray arm are clogged, remove the remaining
particles of soil with a thin pointed object, e.g. a
toothpick.
CLEANING THE CEILING SPRAY ARM
We recommend to clean the ceiling spray arm
regularly to prevent soil from clogging the holes.
Clogged holes can cause unsatisfactory washing
results.
The ceiling spray arm is placed on the ceiling of the
appliance. The spray arm (C) is installed in the
delivery tube (A) with the mounting element (B).
17