Zanussi ZDLN2621 - Basic Settings Configuration; Setting Mode Navigation

Information for test institutes
To receive the necessary information for conducting
performance tests (e.g. according to: BS
EN60436 ), send an email to:
info.test@dishwasher-production.com
In your request, include the product number code
(PNC) from the rating plate.
For any other questions regarding your dishwasher,
refer to the service book provided with your
appliance.
BASIC SETTINGS
You can configure the appliance by changing basic
settings according to your needs.
Number Settings Values
Description
1)
1 Water hardness From level 1 to
level 10 (default:
5)
Adjust the level of the water softener according
to the water hardness in your area.
2 Rinse aid empty
notification
On (default)
Off
Activate or deactivate the rinse aid indicator.
3 End sound On
Off (default)
Activate or deactivate the acoustic signal for the
end of a programme.
4 Auto door open On (default)
Off
Activate or deactivate the AirDry.
5 Key tones On (default)
Off
Activate or deactivate the sound of the buttons
when pressed.
1) For more details, refer to the information provided in this chapter.
You can change the basic settings in setting mode.
When the appliance is in setting mode, the
indicators on the control panel represent available
settings. For each setting, a dedicated indicator
flashes:
1 3 2
4 5
SETTING MODE
How to enter setting mode
You can enter setting mode before starting a
programme. You cannot enter setting mode while
the programme is running.
To enter setting mode, press and hold
simultaneously 30 min and ECO for about 3
seconds.
• The light related to and the indicator
flash.
• The indicators , and are on.
• The lights related to the programme buttons
are on.
How to navigate in setting mode
You can navigate in setting mode using programme
buttons.
8