What does it mean if the interior of my Zanussi ZDLN6531 Dishwasher is wet?
If the interior of your Zanussi Dishwasher is wet, this is not a defect of the appliance. Humidity condensates on the appliance walls.
Why does my Zanussi ZDLN6531 have traces of rust on cutlery?
If there are traces of rust on the cutlery in your Zanussi Dishwasher, it could be due to too much salt in the water used for washing. Also, avoid placing silver and stainless steel cutlery together.
What to do if my Zanussi ZDLN6531 is not draining water and the display shows i20?
If your Zanussi dishwasher is not draining water and the display shows i20, check that the sink spigot and the interior filter system are not clogged. Also, make sure that the drain hose has no kinks or bends.
How to activate Zanussi ZDLN6531 Dishwasher?
If your Zanussi Dishwasher won't activate, ensure that the mains plug is properly connected to the mains socket. Also, check your fuse box to make sure there are no damaged fuses.
Why is there a small leak from the Zanussi Dishwasher door?
If you notice a small leak from your Zanussi Dishwasher door, the appliance might not be levelled. Try loosening or tightening the adjustable feet. If applicable, adjust the rear foot if the door is not centered on the tub.
What to do if my Zanussi ZDLN6531 doesn't drain water and shows i20?
If your Zanussi Dishwasher isn't draining water and the display shows i20, make sure that the sink spigot is not clogged. Also, check that the interior filter system is not clogged and that the drain hose has no kinks or bends.
What to do if my Zanussi ZDLN6531 Dishwasher doesn't fill with water and the display shows i10 or i11?
If your Zanussi Dishwasher isn't filling with water and the display shows i10 or i11, ensure the water tap is open and that the water supply pressure isn't too low. Also, check that the water tap and the filter in the inlet hose are not clogged, and that the inlet hose has no kinks or bends.
Why won't my Zanussi ZDLN6531 drain water? The display shows i20.
If your Zanussi Dishwasher isn't draining and the display shows i20, ensure that the sink spigot and the interior filter system are not clogged. Also, check that the drain hose has no kinks or bends.
What to do if my Zanussi ZDLN6531 Dishwasher won't start?
If the programme on your Zanussi Dishwasher doesn't start, make sure that the appliance door is closed properly. If the delay start is set, either cancel the setting or wait for the countdown to finish. Also, the appliance may be recharging the resin inside the water softener, which takes approximately 5 minutes.
How to fix Zanussi ZDLN6531 not filling with water? The display shows i10 or i11.
If your Zanussi Dishwasher isn't filling with water and the display shows i10 or i11, make sure that the water tap is open and that the water supply pressure is adequate. Also, check that the water tap and the filter in the inlet hose are not clogged, and ensure that the inlet hose has no kinks or bends.
General| Product size | Full size (60 cm) |
|---|---|
| Control panel colour | Black |
| Number of Place Settings | 13 |
| Noise Level | 44 dB |
| Number of washing programs | 8 |
| Washing class | A |
| Drying class | A |
| Cycle time | 240 min |
| Annual Energy Consumption | 237 kWh |
| Drying Performance | A |
| Cleaning Performance | A |
| Delay Start | Yes |
| Half Load Option | Yes |
| Width | 596 mm |
| Depth | 550 mm |
| Height | 818 mm |
| Appliance placement | Built-in |
| Water consumption per cycle | 9.9 L |
| Annual Water Consumption | 2772 L |
| Programs | Eco, Glass, Intensive, Quick |
| Drying system | AirDry |
To Next Page
