Zapi AC-0 SSL User Manual

AE0ZP0EC - AC-0 SSL SENSORED - User Manual Page - 59/100
CNB#6) or first speed (SPEED 1 on CNB#5) or second speed (SPEED 2 on
CNA#15) or third speed (SPEED 3 on CNA#14) or fourth speed (SPEED 4
on CNB#9) switch is closed.
11) MAXIMUM CURRENT
Level 0 to 9. This changes the maximum current of the inverter. At level 9 the
nominal maximum current is supplied; at level 0 the current is almost half of
its nominal value (see the table).
12) AUXILIARY TIME
Not used.
13) MIN VALVE 1
Not used.
14) MIN VALVE 2
Not used.
15) MAX VALVE 1
Not used.
16) MAX VALVE 2
Not used.
17) VALVES VOLTAGE
Not used.
18) VALVE3 VOLTAGE
Not used.
19) VALVE4 VOLTAGE
Not used.
20) V1 OPENING RAMP
Not used.
21) V2 OPENING RAMP
Not used.
22) V1 CLOSING RAMP
Not used.
23) V2 CLOSING RAMP
Not used.
24) HYDRO DELAY
Time units value (seconds). It determines the time delay when an hydraulic
steering function request is switched off.
The following table shows the different values at which the parameters can be
set.

Zapi AC-0 SSL Specifications

General

Brand	Zapi
Model	AC-0 SSL
Category	Inverter
Language	English