Zebra 110Xi4 User Manual

Specifications
Media Specifications
162
P1009874-001 Xi4 User Guide 3/12/09
Media Specifications
Use the correct size and type of labels for best performance. Refer to the tables that follow for
specifications.
110Xi4
110
Important • Media registration and minimum label length are affected by label type and
width, ribbon type, print speed, and printer mode of operation. Performance improves as
these factors are optimized. Zebra recommends qualifying any application with thorough
testing.
Media Specifications 110Xi4 200 dpi 110Xi4 300 dpi 110Xi4 600 dpi
Minimum label length Tear-Off 0.7 in. (18 mm) 0.7 in. (18 mm) 0.7 in. (18 mm)
Peel-Off 0.5 in. (13 mm) 0.5 in. (13 mm) 0.5 in. (13 mm)
Cutter 1.5 in. (38 mm) 1.5 in. (38 mm) 1.5 in. (38 mm)
Rewind 0.25 in. (6 mm) 0.25 in. (6 mm) 0.25 in. (6 mm)
Total media width
(label + backing, if any)
Minimum 0.79 in. (20 mm) 0.79 in. (20 mm) 0.79 in. (20 mm)
Maximum 4.5 in. (114 mm) 4.5 in. (114 mm) 4.5 in. (114 mm)
Total thickness
(includes backing, if any)
0.003 in. (0.076 mm) 0.003 in. (0.076 mm) 0.003 in. (0.076 mm)
0.012 in. (0.305 mm) 0.012 in. (0.305 mm) 0.012 in. (0.305 mm)
Cutter maximum full-width media thickness 0.009 in. (0.23 mm) 0.009 in. (0.23 mm) 0.009 in. (0.23 mm)
Roll media core inside diameter 3 in. (76 mm) 3 in. (76 mm) 3 in. (76 mm)
Maximum roll diameter on 3 in. (76 mm) core 8.0 in. (203 mm) 8.0 in. (203 mm) 8.0 in. (203 mm)
Interlabel gap Minimum 0.079 in. (2 mm) 0.079 in. (2 mm) 0.079 in. (2 mm)
Preferred 0.118 in. (3 mm) 0.118 in. (3 mm) 0.118 in. (3 mm)
Maximum No more than the calibrated
length of the label.
No more than the calibrated
length of the label.
No more than the calibrated
length of the label.
Maximum internal fanfold media pack size
(label + backing): L × W×H
8.0×4.5×4.5 in.
(203×114×114 mm)
8.0×4.5×4.5 in.
(203×114×114 mm)
8.0×4.5×4.5 in.
(203×114×114 mm)
Ticket/tag sensing notch: L × W 0.12×0.25 in. (3×6 mm) 0.12×0.25 in. (3×6 mm) 0.12×0.25 in. (3×6 mm)
Ticket/tag sensing hole diameter 0.125 in. (3 mm) 0.125 in. (3 mm) 0.125 in. (3 mm)
Label registration tolerance (vertical) ± 0.06 in. (± 1.5 mm) ± 0.06 in. (± 1.5 mm) ± 0.06 in. (± 1.5 mm)
Label registration tolerance (horizontal) ± 0.06 in. (± 1.5 mm) ± 0.06 in. (± 1.5 mm) ± 0.06 in. (± 1.5 mm)

Zebra 110Xi4 Specifications

General

Maximum resolution	203 x 203 DPI
Core diameter	76 mm
Ribbon length	300 m
Media thickness	0.076 - 0.305 mm
Maximum media length	3810 mm
Maximum roll diameter	203 mm
Supported paper width	102 mm
Media thickness (imperial)	0.003 - 0.012 \
Maximum media length (imperial)	150 \
Supported paper width (imperial)	4 \
RS-232 ports	1
Standard interfaces	USB 2.0
Connectivity technology	Wired
Weight (imperial)	50 lbs
Dimensions (WxDxH)	261.9 x 517.5 x 393.7 mm
Flash memory	8 MB
Certification	-BSMI, -cTUVus, -CCC, -CE, -C-Tick, -EN55022 Class B, -EN55024, -EN61000-3-2, 3, -FCC Class B, -GOST-R, -ICES-003 Class B, -IEC 60950-1 / EN60950, -KCC, -NOM, -S Mark, -STB, -UkrSEPRO, -VCCI, -ZIK.
Internal memory	16 MB
Built-in barcodes	Code 39, Code 49, Code 93, MaxiCode, PDF417, Postnet, QR Code, UPC-A, UPC-E
Page description languages	XML, ZPL, ZPL II
Storage temperature (T-T)	-40 - 140 °F
Operating temperature (T-T)	5 - 40 °C
Storage relative humidity (H-H)	5 - 85 %
Operating relative humidity (H-H)	20 - 85 %
Power requirements	90 - 264 VAC, 48 - 62 Hz

Weight and Dimensions

Weight	22700 g