Configuration
Print a Network Configuration Label
90
P1009874-001 Xi4 User Guide 3/12/09
Print a Network Configuration Label
If you are using a print server, you can print a network configuration label after the printer is
connected to the network.
To print a network configuration label, complete these steps:
1. On the control panel, press SETUP/EXIT.
2. Press NEXT/SAVE or PREVIOUS to scroll through the parameters until you reach
LIST NETWORK.
3. Press PLUS (+) to confirm printing.
A network configuration label prints (Figure 13). An asterisk designates whether the
wired or wireless print server is active. If no wireless print server is installed, the wireless
portion of the label does not print.
Figure 13 • Network Configuration Label (with a Wireless Print Server installed)
asterisk
indicating the
active print
server
To Next Page
Loading...