89
Configuration
Print a Configuration Label
3/12/09 Xi4 User Guide P1009874-001
Print a Configuration Label
A configuration label lists the printer settings that are stored in configuration memory. After
you load the media and ribbon (if necessary), print a configuration label as a record of your
printer’s current settings. Keep the label to use when troubleshooting printing problems.
To print a configuration label, complete these steps:
1. On the control panel, press SETUP/EXIT.
2. Press NEXT/SAVE or PREVIOUS to scroll through the parameters until you reach
LIST SETUP.
3. Press PLUS (+) to confirm printing.
A configuration label prints (Figure 12).
Figure 12 • Sample Configuration Label
To Next Page
Loading...