Zebra CS6080 Series User Manual

Quick Start Guide 13
Charging Spare Batteries
1. Connect the cable to the cradle with the
USB-C connector.
2. Connect the other end of the cable to a
USB port on the host PC, or to a USB
power adapter plugged into an AC outlet
with the USB-A connector.
3. Remove the spare battery slot cap.
4. Insert the battery into the spare battery
slot to begin charging.
The charge LED on the cradle lights to
show the charging status.
LED Charging Status
LED Charging Status

Zebra CS6080 Series Specifications

General

Brand	Zebra
Model	CS6080 Series
Category	Barcode Reader
Language	English