© 2007 ZIH Corp. All product names and numbers are Zebra
trademarks, and Zebra and the Zebra logo are registered
trademarks of ZIH Corp. All rights reserved.
Printed on
chlorine-free
recycled paper.
79835L-001
Peel/Rewind Upgrade Kit
Installation Instructions
This kit includes the parts and documentation necessary to install the Peel/Rewind upgrade kit
on the following printers:
•ZM400™
•ZM600™
Read these instructions thoroughly before attempting to install this kit.
Prepare for Installation
Parts List
Before proceeding, verify that your kit contains the items for your printer listed below.
Table 1 • Kit Parts List
3 Item Qty
Part Number
Description
Ref
1
79835
ZM400 Upgrade Kit
Ref
1
79836
ZM600 Upgrade Kit
1
1
79925
ZM400 Rewind Pan
1
79683
ZM600 Rewind Pan
2
1
79026
ZM400 Rewind Spindle Assembly
1
79026-6
ZM600 Rewind Spindle Assembly
3
1
79827M
Rewind Cable
4
1
79432
ZM400 Peel Assembly
1
79436
ZM600 Peel Assembly
5
1
30449
Hex Key 5/64 × 2 inch
6
2
HW78814
Screw, M4 × 0.7 × 10 (available in quantities of 5)
7
1
78811
Washer, 0.500 × 0.195 × 0.090
8
5
HW78817
Screw, M4 × 0.7 × 12 (available in quantities of 25)
Bold = Part available for purchase.
Italic = Part not available for purchase, listed and shown for reference only.
To Next Page
