Zebra ZM400 User Manual

89
Troubleshooting
LCD Error Messages
2/26/10 ZM400 User Guide for UPS P1016807-001 Rev. A
There is not enough memory to
perform the function specified on
the second line of the error
message.
Free up some of the printer’s memory
by adjusting the label format or printer
parameters. One way to free up
memory is to adjust the print width to
the actual width of the label instead of
leaving the print width set to the
default. See Set Print Width
on page 56.
Ensure that the data is not directed to a
device that is not installed or is
unavailable.
If the above solutions do not work, call
a service technician.
Table 13 • LCD Error Messages (Continued)
LCD Display/
Printer Condition
Possible Cause Recommended Solution
OUT OF MEMORY
(function)

Zebra ZM400 Specifications