Zebra ZT410 - Page 121

121
Printer Configuration and Adjustment
Adjust Printer Settings
8/25/15 ZT400 Series™ User Guide P1066582-003
Subnet Mask View and, if necessary, change the subnet mask.
To save changes to this setting, set IP Protocol on page 123 to
PERMANENT, and then
reset the print server (see Reset Network on page 125).
User menu item:
Main Menu >
NETWORK
Accepted values:
000 to 255 for each field
Related ZPL command(s):
^ND
SGD command used: Wired:
internal_wired.ip.netmask
Wireless: wlan.ip.netmask
Printer web page: View and Modify Printer Settings >
Network Communications Setup >
TCP/IP Settings
Table 7 • Network Settings (Continued)
▼
WIRED SUBNET MASK
000.000.000.000
▲
NEXT
▼
WLAN SUBNET MASK
000.000.000.000
▲
NEXT