Zebra ZT410 - Page 130

Printer Configuration and Adjustment
Adjust Printer Settings
130
P1066582-003 ZT400 Series™ User Guide 8/25/15
RFID Antenna
Element
If the desired antenna is not achieved through RFID tag calibration, a value may be
specified.
User menu item:
Main Menu >
RFID
Accepted values:
A1, A2, A3, A4
B1, B2, B3, B4
C1, C2, C3, C4
D1, D2, D3, D4
E1, E2, E3, E4
Related ZPL command(s):
^RW
SGD command used:
rfid.reader_1.antenna_port
Printer web page:
View and Modify Printer Settings > RFID Setup >
RFID ANTENNA
RFID Read
Power
If the desired read power is not achieved through RFID tag calibration, a value may be
specified.
User menu item:
Main Menu >
RFID
Accepted values:
0 to 30
Related ZPL command(s):
^RW
SGD command used:
rfid.reader_1.power.read
Printer web page: View and Modify Printer Settings > RFID Setup > RFID
READ PWR
Table 8 • RFID Settings (Continued)
▼
RFID ANTENNA
A1
▲
▼
RFID READ POWER
16
▲