Zebra ZT410 - Page 131

131
Printer Configuration and Adjustment
Adjust Printer Settings
8/25/15 ZT400 Series™ User Guide P1066582-003
RFID Write
Power
If the desired write power is not achieved through RFID tag calibration, a value may be
specified.
User menu item:
Main Menu >
RFID
Accepted values:
0 to 30
Related ZPL command(s):
^RW
SGD command used:
rfid.reader_1.power.write
Printer web page: View and Modify Printer Settings > RFID Setup > RFID
WRITE PWR
RFID Valid
Counter
Resets the RFID valid label counter to zero.
User menu item:
Main Menu >
RFID
Related ZPL command(s):
~RO
SGD command used:
odometer.rfid.valid_resettable
RFID Void
Counter
Resets the RFID void label counter to zero.
User menu item:
Main Menu >
RFID
Related ZPL command(s):
~RO
SGD command used:
odometer.rfid.void_resettable
Table 8 • RFID Settings (Continued)
▼
RFID WRITE POWER
16
▲
RFID VALID COUNT
0
RESET
RFID VOID COUNT
0
RESET