183
Troubleshooting
Error Messages
8/25/15 ZT400 Series™ User Guide P1066582-003
There is not enough memory
to perform the function
specified on the second line of
the error message.
Free up some of the printer’s
memory by adjusting the label
format or printer parameters.
One way to free up memory is
to adjust the print width to the
actual width of the label
instead of leaving the print
width set to the default. See
Print Width on page 104.
Ensure that the data is not
directed to a device that is not
installed or is unavailable.
If the problem persists, call a
service technician.
Table 19 • Error Messages (Continued)
Display/
Indicator Lights
Possible Cause Recommended Solution
OUT OF MEMORY
STORING GRAPHIC
OUT OF MEMORY
STORING FORMAT
OUT OF MEMORY
STORING BITMAP
OUT OF MEMORY
STORING FONT
To Next Page
Loading...