FDM Technical Data and Operating Instructions
4.3 LED Video Lights (SYNCLight / SYNCLight plus)
In order to produce well lighted and tack sharp video captures it is essential to maintain
perfect lighting conditions at the patient’s side. Only with adequate lighting conditions
video cameras can work with shutters times short enough to freeze fast movements and
capture sharp images.
The LED video lights SYNCLight and SYNCLight plus are accessories of the FDM systems
and perfectly adapted for use in combination with zebris SYNCCam as well as the force
distribution measurement. Their brightness can be adjusted infinitely.
The integrated synchronization unit automatically switches the lights on at the start of a
measurement and turns them off again after stopping it.
Both SYNCLights are equipped with ¼ inch tripod threads and can be adapted to zebris
tripods as well as commercially available camera tripods
In order ensure failure-free operation of the SYNCLights it is manda-
tory to keep the black heat sinks at their back side uncovered and well
air circulated all the time.
To Next Page
Loading...
