13
6. Set the correct date and time. Once you have adjusted the first
value, press the shoot/record button to jump to the next value (you
will notice the next value will now be highlighted yellow).
7. When all adjustments have been made for date and time, press the
ON/OFF button twice to exit the navigation menu.
6.5 AUTO POWER OFF
The auto power OFF function is designed to help extend the battery
life of the ZX-10. It will automatically power OFF after a selected
period of inactivity (1, 3, 5 minutes). To choose which option the unit
will power off (1, 3 or 5 minutes), follow the steps below:
1. Press the shoot/record button to end recording if you are in video
mode and recording.
2. Press and hold the shoot/record button on the top of the unit. This
will bring up the navigation menu.
3. Quick press the shoot/record button again once in the navigation
menu to navigate to the settings menu.
4. Press the down button twice to navigate down the menu to ‘auto
power off’. You will see this option highlight.
5. Quick press the shoot/record button again once to open the Auto
Power Off settings. Four options will appear on the menu: 1 minute,
3 minutes, 5 minutes and OFF.
Press the down button to the option
you require.
To Next Page
Loading...
Need help?
General
